Oil Tank Replacement Cost in Lexington, MA
If you are looking for oil tank replacement cost in Lexington, Massachusetts then look no further. Our services include a wide array of different oil tank replacements that will meet all your needs.
It is possible that you don't see any leaks in your heating oil tank. However, if it's been around for more than a decade, and it has a single wall, it's probably safe for you and your family to replace it. Heating oil tanks made in the past don't have as much longevity as modern tanks because they're made of thinner materials. Oil spillage and its attendant cost of cleanup are one of the reasons your old heating oil tank needs a change. Also, it is understandable if you're worried about the cost of getting a new one and installing it. However, you should consider the safety and possible cost of remedying hazards that are attached to an old heating oil tank. You'll understand the importance of replacing your old heating oil tank, as soon as possible, after reading this piece. You'll also know what it'll cost you to replace your old heating oil tank in Lexington, Massachusetts.
Cost of Oil Tank Replacement in Lexington, MA.
Replacing an oil tank in Lexington, Massachusetts depends on the type of oil tank you're looking to install and the extent of work that needs to be done to improve the efficiency of your oil burner and its supply line and pipes. You can have a single-wall oil tank in place of your old heating oil tank with a price range of
$2950 to $3550. However, for a double-wall or Roth tank, it'll cost you about $4000.
Oil Tank Replacement Near Me - Lexington, MA.
Oil tank replacement is considered an important part of home and heating system maintenance because it influences the home's heating system efficiency and the cost of heating the home. While there are many businesses that'll offer to replace your heating oil tank in Lexington, MA., quality oil tank replacement is the right one to handle your old heating oil tank replacement project in and around Lexington.
Considering the characteristic cold weather of Massachusetts, it's a common occurrence for heating oil tanks to be indoors. However, those that are outdoors are exposed to the harsh coldness that changes the liquid oil into a gelatinous state. In this state, heating becomes inefficient and it costs you more to achieve any form of warmth throughout the house.
Therefore, contact Quality Oil Tank Replacement to help you replace your old heating oil tank professionally.
Why Should You Replace Old Heating Oil Tanks?
All the advantages that come with using a heating oil tank can quickly become a demerit if you don't replace your tank when you should. Some of the reasons you should replace your old heating oil tank include:
To avoid oil spills
Oil spills are major environmental, health, and insurance concerns. Therefore, replacing your old heating oil tank with a new one may help you avoid paying a huge cost in cleaning up oil spills. Also, installing a new heating oil tank can qualify you, as the homeowner, for insurance against potential future leaks, and save you some cost in remediation fees.
To reduce your heating cost
The newer your heating oil tank and its fittings are, the better it serves oil to your heating source. When your furnace gets oil adequately, it burns continuously and heats your home adequately. Also, you don't lose oil through vent and pipe leaks, helping you to account for every gallon of oil you use, considering the environmental conditions.
To maintain heating efficiency in your home
The heating of your home doesn't only concern your heating oil tank, it concerns every part of the heating system, including the vents, pipes, and furnace. When you replace your old heating oil tank, it's advisable that you check other components of the heating system. Checking and repairing the components of the heating system while installing a new heating oil tank ensures that your system works efficiently.
Get a free quote
Oil Tank Replacement Cost page
Steps Involved in Removing and Replacing an Oil Tank
While removing and replacing old oil tanks are essential, they are better done by professionals. The steps professionals like Quality Oil Tank Replacement will take to remove and replace your old oil tank in Lexington, MA, are:
Clearing the surrounding of the tank
It is common for garages and basements where oil tanks are located to be surrounded with stored items, and sometimes, debris. Remove the stored items and debris to create room for removing the old tank.
Providing an alternative heating source for the home
Aboveground heating oil replacement and installation takes about 6 hours and your home requires an alternate source of heat during this time. A kerosene torpedo heater or an electric heater will work well while you're working on installing a new oil tank. The heat helps to prevent the water in your pipes from freezing and heating the interior of your home. It also makes removing oil from the old tank easier.
Removing oil from the old oil tank
There's a possibility that you may have relatively new oil in your old tank before you decide to change it. In this case, the oil will be transferred to another container temporarily. However, the sediments and sludge at the base of the tank won't be transferred with the oil. A transfer pump will help with the removal of oil from the old tank to its temporary storage.
Preparing new oil tank for installation
While oil is being transferred to its temporary storage, prepare the new tank for installation. The preparation includes
● Removing knockouts from the tapped openings of the tank.
● Install plugs in the outlets that won't be used.
● Assemble the tank's base or feet and balance it.
● Slant the tank about one-quarter of an inch towards the base outlet.
● Remove any material present in the tank.
Preparing to remove the old oil tank
Cut the fill and vent pipe for the old tank and close the bottom drain valve. Check that it's shut by tapping on it, and loosening it. Remove the bottom feed oil tank line that goes to the burner. Remove the copper oil line between the burner and the tank as it is likely damaged or clogged with sludge. However, if it has been changed recently, it may be reused.
Remove the old oil tank
After completing the heating oil transfer, remove the snorkel from the oil tank. Pull the tank from the wall and remove the tank to the exterior of the house. With only sludge left in the tank, there's almost zero risk of spilling oil on the ground.
Therefore, you can tip the tank on end to make carrying it easier.
Preparing protective bollards positions
Depending on where your oil tank is located, bollards that'll protect it from a head-on collision may be required. It is mostly used for aboveground oil tanks that are stationed in the garage. Dig holes in the concrete to hold the protective bollards before installing the new oil tank.
Placing new oil tank in position
Transfer the new oil tank to its right position. One way to get this done easily is to use a containment tub to slide the tank over the floor. It helps to make moving the tank easier and reduces the possible damage to the tank during this operation. Measure the distance between the tank and the walls and adjust the tank's position to ensure its tappings align with the existing fill and vent openings.
Installing the new oil tank pipes, alarm, and gauge. The alarm system, gauge, and pipes go onto the new oil tank. Ensure that they are side threaded to enable a tight fitting.
Refill or fill the new oil tank with heating oil.
Put new oil into the new oil tank or refill it with your relatively new oil. While some people prefer to have new oil in their new tank, some homeowners want to save on costs and reduce waste, hence the use of their relatively new oil in their new tank.
Finish up the oil tank piping.
Cut appropriate pipes to connect the top tappings of the new oil tank to the fill and vent openings. Tighten the pipes to avoid any leakages. Also, attach oil supply lines to the right tube.
Routing oil supply to the oil burner
This operation requires care as you want to avoid puncturing the oil supply line. Usually, we pass the oil supply line along the edges of the floor and cover it with floor trims. Ensure that the oil supply line to the burner and the oil return line to the tank are well-fitted. Check the valve and air bleed to ensure the system runs perfectly.
Completing the exterior fill and vent piping
The exterior oil tank fill and vent piping include a riser and cap on the oil vent line, and in some cases, a containment unit at the filler oil pipe. The containment unit is not installed in all oil tanks but it is important in catching oil spills that
occur during oil tank filling.
Remove the old oil tank from the premise
The old oil tank should be transported away from your home and taken to the environmental facility where it'll be opened up and the sludge taken out, to be disposed of properly. The tank will also be cleaned and disposed of as scrap metal.
Clean the new oil tank area
After installing the new oil tank, remove every cut and unused pipe and lines. Sweep debris off the ground, and preferably wash the floor to remove any oil stain that may be present on the ground.
Frequently Asked Questions About Heating Oil Tank Replacement
Here are some professional answers to some of your heating oil tank replacement questions.
What is the lifespan of an oil tank?
An oil tank is usually made of metal if it's an old one. However, new oil tanks are made of durable plastics and they're double-walled. The lifespan of oil tanks spans several decades, usually up to 40 years. However, the average lifespan of any heating oil tank is 20 years.
How long does it take to change an oil tank?
The duration for removing an old oil tank and installing a new one can last the whole day. However, professional heating oil tank replacement outfits can get it accomplished in about 6 to 8 hours.
Do you need a permit to replace an oil tank in Massachusetts?
Yes, you need a permit from the State Fire Marshal's Office to make or install any - new or used - aboveground storage tank. They'll visit your installation site for inspection and upon completion, you'll receive a permit.
Final Thoughts
Heating oil tanks can last a long time but the accumulation of sludge can reduce the efficiency of your home's heating system. You should replace your old heating oil tank with a new one, and a professional outfit such as Quality Oil Tank Replacement will help you do that in Lexington, MA.
About Lexington, MA.
Lexington is a city in Middlesex County, Massachusetts, United States. It has a population of 31,072 at the 2010 census. The city was settled by Puritans who were seeking religious freedom from England. It was one of the first towns to be founded in the Massachusetts Bay Colony and it has recorded great economic success from its large farming estates. However, new technology companies have begun to spring up in Lexington since the 1960s, resulting in a population boom.
Lexington is considered to be the birthplace of the American Revolution and to this day, they commemorate the Battle that happened in Downtown during Patriot's Day festivities.
Weather in Lexington, MA
Lexington has a humid continental climate with four distinct seasons. The average high temperature during July and August is around 85 degrees Fahrenheit with an average low of 63 degrees Fahrenheit at night. Lexington has an annual snowfall of about 25 inches on average, but it can get as high as 50 inches during some winters.
Home Heating in Lexington, MA
Due to the nature of winters in Lexington, MA, house heating is a norm. Lexington is one of the few towns in Massachusetts that requires a permit for new heating oil tanks. The permit is free and can be obtained from the Building Department, which handles all issues relating to construction. Although Lexington, MA has some of the most stringent home heating oil tank installation laws in Massachusetts. All you need to do is contact the Building Department for more information on how to go about getting your new tank installed.
